Register Login ##{$loggedInUsername}##
 
  Język Polski   English
baner

Advanced filters
 

Search Results

Thermal and mechanical properties of PLA/ENR thermoplastic vulcanizates compatibilized with tetrafunctional double-decker silsesquioxanes

Sandra Paszkiewicz    Grzegorz Kramek    Konrad Walkowiak    Izabela Irska    Elżbieta Piesowicz    Monika Rzonsowska    Beata Dudziec    Mateusz Barczewski   
593-606
2024-01-04

The effect of natural Gongura roselle fiber on the mechanical properties of 3D printed ABS and PLA composites

Anandha Moorthy Appusamy    Natarajan Nanjappan    Prakash Eswaran    Madheswaran Subramanian   
119-124
2022-03-18

Effects of carbon nanotubes and graphene on the structure and properties of natural rubber
Jinyong Sui    zhengu    Xiaoyi Zhang    Zhenxu Li    Lining Song    Lina Yang    Ning Wang   
217-223
2021-05-07

Effect of wood flour addition and modification of its surface on the properties of rotationally molded polypropylene composites
M. Barczewski    M. Szostak    D. Nowak    A. Piasecki   
772-784
2021-01-13

Mechanical and thermal properties of cotton-bamboo fabric/glass fiber epoxy composites
Kailasam Chandrasekaran    Periyasamy Shanmugam     Palanisamy Senthilkumar   
567-574
2023-01-02

Influence of fiber reinforcement towards the physical characteristics of low density polyethylene laminated composites
S. Ravichandran    A. Daniel Raj    P. Balaji Visvanath    Faruq Mohammad    Hamad A. Al-Lohedan    Suresh Sagadevan   
449-457
2020-12-16

Fire resistance and mechanical properties of powder-epoxy composites reinforced with recycled glass fiber laminate
Rafał Oliwa    Katarzyna Bulanda    Mariusz Oleksy    Paulina Ostyńska    Grzegorz Budzik    Magdalena Płocińska    Sławomir Krauze   
280-288
2020-12-15

Effect of glycerol on the properties of coconut oil cake reinforced poly(lactic acid)

Sachin Sumathy Raj    Thiruvasagam Chellapandian    Balakrishnan Nanjappan   
61-66
2022-02-24

Morphology and selected properties of kenaf fiber/cornhusk reinforced corn starch hybrid biocomposites
M.D. Hazrol    S.M. Sapuan    R.A. Ilyas    E.S. Zainudin    M.Y.M. Zuhri    N.I. Abdul Wahab   
575-588
2023-01-11

Influence of natural fillers on the thermal and mechanical properties of epoxy resin composites
Karolina Młynarczyk    Filip Longwic    Beata Podkościelna    Tomasz Klepka   
102-109
2022-03-28

Effect of shells number and machining on selected properties of 3D-printed PLA samples
Natalia Kowalska    Paweł Szczygieł    Michał Skrzyniarz    Sławomir Błasiak   
186-190
2024-04-17

Modeling of the dynamic mechanical properties of the coagent reinforced row hydrogenated poly(butadiene-co-acrylonitrile) (HNBR) and the morphology of coagent nanodispersions in HNBR matrix
B. Likozar    M. Krajnc   
436-447
2022-08-18

Mechanical properties of polymer concretes containing different amount of hematite or colemanite
O. Gencel    W. Brostow    G. Martínez-Barrera    M. S. Gok   
276-283
2012-04-30

Effect of HNT on mechanical and thermal properties of poly(lactic acid)/polypropylene carbonate blends
Intan Najwa Humaira Mohamed Haneef    Yose Fachmi Buys    Norhashimah Mohd Shaffiar    Sharifah Imihezri Syed Shaharuddin    Abdul Malek Abdul Hamid    Mohd Faizul Mohd Sabri    Amalina Muhammad Afifi   
459-465
2021-10-26

Influence of accelerated weathering on mechanical and thermomechanical properties of poly(lactic acid) composites with natural waste filler
Mateusz Barczewski    Jacek Andrzejewski    Danuta Matykiewicz    Agnieszka Krygier    Arkadiusz Kloziński   
119-126
2021-01-12

Mechanical properties of sandwich products obtained by 3D printing from PLA-PLA/Al2O3
Madheswaran Subramaniyan    Sivakumar Karuppan   
646-651
2024-01-04

Structural conditions of processing and application of elastomers
W. M. Rzymski   
100-106
2022-09-19

The effect of mold temperature and injection velocity on selected properties of polyethylene moldings
E. Bociąga   
830-836
2022-09-21

Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites
N. Mohd Nurazzi    A. Khalina    M. Chandrasekar    H.A. Aisyah    S. Ayu Rafiqah    R.A. Ilyas    Z.M. Hanafee   
115-124
2020-12-15

The influence of blowing extrusion process of PA film on its structure and physical properties
J. Stasiek    E. Piórkowska    A. Gałęski   
194-203
2022-09-17

Polymer blends PET/PE-LD and PET/PP with a new compatibilizer
J. Janik    S. Lenart    W. Królikowski    P. Penczek   
432-441
2022-09-01

The influence of materials dosing order and shear forces on the properties of high density polyethylene/ground tire rubber blends obtained in co-rotating twin screw extruder
K. Formela    M Cysewska    J. Haponiuk   
324-332
2014-04-30

Mechanical properties of vulcanizates of NR/NBR blends swelled by motor oil
C. Dębek    J. Magryta    D. Dębek   
58-65
2022-08-30

Effects of blow molding ratio on mechanical properties of polylactide nanocomposite films
M. Żenkiewicz    J. Richert    A. Różański   
869-876
2010-12-30

Mechanical properties of polypropylene copolymers composites filled with rapeseed straw
D. Paukszta    M. Szostak    M. Rogacz   
165-169
2014-02-28

Effects of chemical and supermolecular structures on mechanical properties of polyurethane/unsaturated polyester compositions of interpenetrating polymer networks types
P. Król    J. Wojturska   
790-800
2022-09-01

Influence of halloysite on the structure, thermal and mechanical properties of polyamide 6
I. Legocka    E. Wierzbicka    T. M. Al-Zahari    O. Osawaru   
24-32
2013-01-30

Effect of poly(ethylene terephthalate) and polyethylene comminution on the mechanical and thermal properties of polymer compositions
B. Królikowski   
752-759
2022-08-26

Recycling of ABS operating elements obtained from industry 3D printing machines
Dawid Marciniak    Piotr Czyżewski    Dariusz Sykutera    Marek Bieliński   
803-810
2021-01-12

Mechanical properties of colored acrylonitrile-butadiene-styrene injection molded parts
M. Trzaskalska    P. Palutkiewicz    E. Bociąga   
791-798
2021-01-13

Sage-modified polydimethylsiloxane applied as antibacterial wound dressing material
Sara Sarraj    Małgorzata Szymiczek    Dariusz Jędrejek    Agata Soluch    Roksana Kurpanik   
33-43
2024-02-13

Physicochemical and mechanical properties of natural cellulosic fiber from Coccinia Indica and its epoxy composites
M. Bhuvaneshwaran    P. S. Sampath    S. Balu    S. Sagadevan   
656-664
2021-01-12

The influence of halloysite on the physicochemical, mechanical and biological properties of polyurethane- -based nanocomposites
Maciej Mrówka    Małgorzata Szymiczek    Tomasz Machoczek    Joanna Lenża    Jakub Matusik    Piotr Sakiewicz    Magdalena Skonieczna   
784-791
2020-12-17

Biobased composites
J. Ganster    J. Erdmann    H.-P. Fink   
423-434
2013-06-30

The influence of surfactants and ionic liquids on the mechanical and magnetic properties
M. Masłowski    M. Zaborski   
743-748
2011-10-30

Effect of "core-shell” polymeric nanofiller on the structure and properties of polylactide and thermoplastic corn starch blend
R. Jeziórska    A. Szadkowska    B. Świerz-Motysia    J. Kozakiewicz   
354-363
2012-05-30

Study on the mechanical properties and structure of the compounds of PE/PVC recyclates filled with wood flour
J. Tomaszewska    S. Zajchowski   
106-113
2013-02-28

Studies on the effect of curing conditions on the curing rate and mechanical properties of moisture-cured poly(urethane-urea) elastomers containing oligocarbonate segments
J. Kozakiewicz    G. Rokicki    J. Przybylski    K. Sylwestrzak    P. G. Parzuchowski    K. M. Tomczyk   
564-570
2011-08-30

Nonconventional methods of injection molding
E. Bociąga   
10-19
2022-09-01

Influence of compounding processes and fibre length on the mechanical properties of abaca fibre-polypropylene composites
A. K. Bledzki    O. Faruk    A. A. Mamun   
120-125
2022-08-23

Mechanical and rheological properties of polyethylene compositions with vegetable fibres
R. Steller    W. Meissner   
332-338
2022-09-18

Study on mechanical properties of the crosslinked with isocyanates product of the reaction of modified soybean oil with epoxy resin
P. Czub    P. Kasza   
466-476
2014-06-30

The improvement in properties of polyester resin-based composites using a new type of silane coupling agent
Włodzimierz Urbaniak    Wojciech Bednarek    Dominik Paukszta    Marek Szostak    Joanna Szymańska   
221-225
2023-07-13

The influence of calcium carbonate and its modifications on the extrusion process and selected functional properties of polypropylene cast films
Arkadiusz Kloziński    Małgorzata Szczepańska    Paulina Jakubowska    Bronisław Samujło    Mateusz Barczewski    Grzegorz Lota   
509-521
2022-11-17

Influence of fiber length, fiber content and alkali treatment on mechanical properties of natural fiber-reinforced epoxy composites
M. Bhuvaneshwaran    P. S. Sampath    Suresh Sagadevan   
93-99
2021-01-12

A preliminary study on the new thermoplastic vulcanizates
B. Świerz-Motysia    B. Jurkiewicz    M. Rajkiewicz   
203-209
2022-08-26

The influence of accelerated aging on selected mechanical properties of polypropylene with organic fillers
Małgorzata Szymiczek    Monika Chomiak    Błażej Chmielnicki    Sara Sarraj    Paulina Gołuch   
308-316
2022-09-09

Experimental analysis on the technical behavior of carbon black filled rubber blends’ rollers for rice husk removal application
Prabhakaran Paramasivam    Rajesh Ranganathan    Rajasekar Rathanasamy    Gobinath Velu Kaliyannan    Sathish Kumar Palaniappan    Samir Kumar Pal    Moganapriya Chinnasamy   
50-55
2021-01-12

The influence of cyclization and crosslinking on the properties and networks of photoinitiated multifunctional methacrylate polimers derived from succinic anhydride and their copolimers with styrene
M. Podgórski    J. Księżopolski    E. Chmielewska   
277-283
2010-04-30

Evaluation of the physico-mechanical and electrical properties of styrene-butadiene rubber/aluminum powder and styrene-butadiene rubber/cerium sulfate composites
A. Nassar    A. A. Yehia    S. H. El-Sabbagh   
100-108
2015-02-28

Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions
K. Formela    M. Bogucki   
488-494
2014-06-30

Effect of ethanol-assisted mixing on the selected properties and homogeneity of NR/BR blends

Chao Meng   
142-148
2023-05-16

Wood chip plastic composite – a novel bio-based material with high mechanical properties
R. Hartmann    M. Koch   
556-559
2021-01-15

Supermolecular structure and selected properties of PA 6/LCO modified fibres
M. Bączek    J. Janicki   
637-644
2011-09-30

Mechanical and electrical properties of acrylonitrile-butadiene rubber filled with treated nanographite
D. E. El-Nashar    N. N. Rozik    S. L. Abd El-Messieh   
834-844
2014-12-30

The effect of plasticizers and chitosan concentration on the structure and properties of Gracilaria sp.-based thin films for food packaging purpose
M. Zulham Efendi Sinaga    Saharman Gea    Cut Fatimah Zuhra    Yuan Alfinsyah Sihombing    Emma Zaidar    Firman Sebayang    Tya Utari Ningsih   
2021-02-17

Biocomposites based on PHB filled with wood or kenaf fibers
S. Kuciel    A. Liber-Kneć   
218-223
2011-03-30

PA 10.10 and PA 6 composites with glass or basalt fibre: mechanical properties in dry and wet state
Paulina Romańska    Stanisław Kuciel   
159-166
2024-04-16

Synthesis and characterization of cross-linked poly(esterurethane)s for elastomeric bearings
S. Oprea   
634-640
2010-09-30

Modification of epoxy-novolak compositions with reactive rubbers and coal as a filler
U. Szeluga    L. Kurzeja    H. Galina   
809-816
2022-08-30

Effect of batched water exposed to a constant magnetic field on the properties of concrete filled with waste fly ash, phosphogypsum and starch
Ewa Miękoś    Tomasz Klepka    Marek Zieliński    Dariusz Sroczyński    Łukasz Garbacz    Anna Fenyk    Anna Łukawska   
53-60
2022-02-19

Epoxy compositions with use of modified vegetable oils
P. Czub   
182-189
2022-08-24

A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers. Part I
Paweł Wawrzyniak    Waldemar Karaszewski   
346-356
2020-12-15

Influence of chemical foaming on the structure and selected properties of glass fiber reinforced PA6
Natalia Konczal    Bartosz Nowinka    Marek Bieliński   
475-482
2022-11-17

Analysis of mechanical properties and distribution of deformation during the shear of polymer-fiber composites containing flame retardants
Rafał Oliwa    Katarzyna Bulanda    Mariusz Oleksy    Grzegorz Budzik    Sławomir Krauze   
387-393
2020-12-15

The effect of basalt knitted fabric on the properties of green epoxy resin
Hafsa Jamshaid    Abdul Waqar Rajput    Bilal Zahid    Sanam Memon    Raja Fahad Qureshi    Sarmad Aslam    Muhammad Nadeem   
67-71
2022-02-24

Synthesis, properties and applications of new (bio)degradable polyester urethanes
J. Brzeska    P. Dacko    H. Janeczek    H. Janik    W. Sikorska    M. Rutkowska    M. Kowalczuk   
365-371
2014-05-30

Preparation, structure and useful properties of poly(e-caprolactone)/layered silicates nanocomposites
J. Pigłowski    A. Kiersnowski    J. Dołęga   
704-715
2022-08-30

Polyurethanes modified with functionalized silsesquioxane — synthesis and properties
K. Pielichowski    M. Jancia    E. Hebda    J. Pagacz    J. Pielichowski    B. Marciniec    A. Franczyk   
783-793
2013-10-30

Properties of ZnO/SiO2 cross-linked butadiene-acrylonitrile rubber
M. Zaborski    M. Owczarek    T. Paryjczak    A. Kaźmierczak   
339-346
2022-09-18

Preparation and characteristics of polypropylene composites
Z. Majchrzak    J. Lipczyński   
190-194
2022-08-26

Mechanical and thermal properties of rigid PVC and graphene nanocomposites obtained by melt–mixing
Sławomir Wilczewski    Katarzyna Skórczewska    Jolanta Tomaszewska    Krzysztof Lewandowski    Ömer Faruk Şentürk   
86-91
2024-03-07

Nanocomposites of polypropylene and polyethylene with montmorillonite type clays
A. Pawlak    J. Morawiec    E. Piorkowska    A. Galeski   
240-247
2022-09-01

Calcium lignosulfonate as eco-friendly additive for crosslinking fibrous composites with phenol-formaldehyde resin matrix
Ł. Klapiszewski    R. Oliwa    M. Oleksy    T. Jesionowski   
102-108
2021-01-13

The effect of hollow glass microspheres on the properties of high silica glass fiber fabric/liquid silicone rubber composite sheet
S. Chen    Y. Qin    Y. Song    B. Wang   
178-184
2021-01-13

Effect of wood particle size on mechanical properties of industrial wood particle-polyethylene composites
C. Gozdecki    S. Zajchowski    M. Kociszewski    A. D. Wilczyński    J. Mirowski   
375-380
2011-05-30

Effect of surface modification by acetone vaporization on the structure of 3D printed acrylonitrile-butadiene-styrene elements
D. Marciniak    P. Szewczykowski    P. Czyżewski    D. Sykutera    M. Bieliński   
785-790
2021-01-13

Study of structure and fatigue strength of thermoplastic elastomers modified with nanoparticles and radiation-crosslinked
M. Rybko    M. El Fray   
400-408
2014-05-30

Properties of butadiene-acrylonitrile rubber containing precipitated aminoacid modified chalk
M. Zaborski    M. Lipińska   
428-435
2022-09-18

Effect of the content of rigid segments on the properties of polycarbonate urethanes for use in intervertebral disc implants
M. Auguścik    B. Waśniewski    M. Krzyżowska    J. Dąbrowski    J. Ryszkowska    W. Karalus   
551-558
2015-09-30

Poly(butylene terephthalate/carbon nanotubes nanocomposites. Part II. Structure and properties
E. Piesowicz    I. Irska    K. Bryll    K. Gawdzińska    M. Bratychak   
24-30
2021-01-24

Effect of particle size and particle surface pretreatment of fillers on selected properties of model ceramic-polymer composites used as dental fillings
J. Siejka-Kulczyk    M. Lewandowska    J. Kurzydłowski   
208-212
2022-08-24

Polypropylene composites with porous and solid structure reinforced with cut fibers
Jolanta Janik   
208-215
2020-12-15

Selected properties of polypropylene composites with shungite
M. Żenkiewicz    J. Richert    P. Rytlewski    K. Moraczewski    M. Stepczyńska   
119-126
2020-02-28

Rigid polyurethane foams with antibacterial properties modified with pine oil
Anna Strąkowska    Sylwia Członka    Karolina Miedzińska    Krzysztof Strzelec   
691--697
2020-12-16

Shape memory properties of poly(methyl methacrylate-co--2-hydroxyethyl methacrylate)/poly(ethylene glycol) complexes
G. Liu    D. Xie    Y. Li    Y. Zhang    F. Huang   
304-307
2013-04-30

Reactive compatibilization of polyester elastomer/polyamide 6 blends with oxazoline functionalized low-density polyethylene
R. Jeziórska   
291-297
2022-09-01

Effect of selected vegetable oils on the properties of acrylonitrile-butadiene rubber vulcanizates
A. I. Khalaf    A. A. Ward    A. E. Abd El-Kader    S. H. El-Sabbagh   
43—56
2015-01-30

Effect of environmentally-friendly flame retardants on fire resistance and mechanical properties of rigid polyurethane foam
J. Czech-Polak    B. Przybyszewski    M. Heneczkowski    A. Czulak    M. Gude   
113-116
2021-01-24

Analysis of thermomechanical properties and morphology of polyethylene pipes after aging by UV radiation
A. Gnatowski    M Chyra    W. Baranowski   
308-313
2014-04-30

Mechano-chemical recycling of sulfur cured natural rubber
G. K. Jana    R. N. Mahaling    T. Rath    A. Kozłowska    M. Kozłowski    Ch.K. Das   
131-136
2022-08-26

Epoxy resin compositions containing liquid phosphorus flame retardants used in infusion technology
Rafał Oliwa   
578-581
2020-12-16

Influence of synthesis conditions on molecular weight as well as mechanical and thermal properties of poly(hexamethylene 2,5-furanate)
Sandra Paszkiewicz    Izabela Irska    Konrad Walkowiak     Agata Zubkiewicz    
527-531
2021-10-28

Thermal and mechanical properties of polyamide 12/modified carbon nanotubes composites prepared via the in situ ring-opening polymerization
I. Pełech    M. Kwiatkowska    A. Jędrzejewska    R. Pełech    I. Kowalczyk   
101-108
2021-01-15

The morphology and mechanical properties of recyclated polyethylene/polyamide laminate
M. Jastrzębska    M. Rutkowska    H. Janik    S. Jose    S. Thomas   
801-805
2022-08-18

The influence of synthetic polyhydroxybutyrate on selected properties of novel polyurethanes for medical applications. Part I. Polyurethanes with aromatic diisocyanates in hard segments
J. Brzeska    P. Dacko    H. Janeczek    M. Kowalczuk    H. Janik    M. Rutkowska   
41-46
2021-08-31

Effect of composition and phase inversion in PET/LDPE and PET/PP blends on their mechanical and rheological properties and morphological structure
J. Janik    W. Królikowski   
250-255
2022-09-18

The influence of hard segment crosslinking on the morphology and mechanical properties of segmented poly(ester-urethanes)
H. Janik    J. Vancso   
139-142
2022-09-01

Effect of maleated linear low density polyethylene on the structure and mechanical properties of terpolymer acrylonitryle-butadiene-styrene based blend wastes
R. Jeziórska    A. Szadkowska    A. Abramowicz   
705-713
2012-10-30

Correlation of manufacturing defects and impact behaviors of kenaf fiber reinforced hybrid fiberglass/Kevlar polyester composite

M.J. Suriani    S.M. Sapuan    C.M. Ruzaidi    J. Naveen    H. Syukriyah    M. Ziefarina   
30-35
2021-01-20

Organosilicon polymer for the release of antimicrobial drugs
Sara Sarraj    Małgorzata Szymiczek   
149-157
2022-05-13

Use of rapid prototyping technology in complex plastic structures Part II. Impact of operating conditions on functional properties of polymer harmonic drives
Jacek Pacana    Rafał Oliwa   
216-223
2021-01-12

Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment
N. Mohd Nurazzi    A. Khalina    S. M. Sapuan    R. A. Ilyas   
665-675
2021-01-12

Selected structural parameters and thermal and mechanical properties of blends of poly(ethylene terephthalate), isotactic polypropylene grafted with ricinyl-2-oxazoline maleate and polycarbonate (PET/i-PP-g-MRO/PC)
R. Jeziórska   
414-422
2022-09-18

Influence of water absorption on chosen strength properties of single-polymer polyester composites
K. Gawdzińska    A. Gądek-Moszczak    K. Bryll    I. Irska    S. Paszkiewicz   
264-269
2021-01-13

Effect of ricinol-2-oxazoline methylmaleate on the structure and properties of polyamide 6 and low density polyethylene blends
R. Jeziórska   
623-633
2022-09-01

Study on the influence of mineral powder fillers modification on the selected mechanical properties of linear low-density polyethylene
M. Gościański    H. Maciejewski    J. Guliński    H. Leda   
15-22
2022-09-01

Electrical properties of sugar palm nanocrystalline cellulose reinforced sugar palm starch nanocomposites
M. D. Hazrol    S. M. Sapuan    R. A. Ilyas    M. L. Othman    S. F. K. Sherwani   
363-372
2020-12-15

Biodegradable polymer composites based on polylactide used in selected 3D technologies
Katarzyna Bulanda    Mariusz Oleksy    Rafał Oliwa    Grzegorz Budzik    Małgorzata Gontarz   
557-562
2020-12-16

Effect of photooxidative ageing at natural conditions on dynamic mechanical properties of PE-LD/PE-LLD blends
A. Ribes-Greus   
250-254
2009-04-20

Characteristic and applications of single polymer composites
M. Żenkiewicz    K. Moraczewski    P. Rytlewski    M. Stepczyńska    T. Żuk   
3-11
2015-01-30

Magnetorheological materials based on ethylene-octene elastomer
M. Masłowski    M. Zaborski   
825-833
2014-12-30

Tribological properties of biodegradable polyurethanes of various structure and content of rigid elements
W. Karalus    J. R. Dąbrowski    M. Auguścik    J. Ryszkowska   
509-518
2021-01-24

Effect of plasticizer with silanol groups on the structure and properties of polylactide and thermoplastic corn starch blend
A. Szadkowska    R. Jeziórska    M. Żubrowska    E. Spasówka    P. Rościszewski   
683-692
2021-01-24

Criterion for the choice of injection method
E. Bociąga   
172-180
2010-03-30

Effect of resin modification on the impact strength of glass-polyester composites
M. Barcikowski    W. Królikowski   
450-460
2013-06-30

Modification of thermoplastic polymers with scrap paper cellulose fibres. Part II. Modification of polyolefins with scrap paper cellulose fibres
E. Kowalska    J. Pełka   
268-275
2022-09-19

Effect of chemical modification of poly(butylene tere-phthalate) on flexible properties
R. Ukielski    F. Lembicz   
784-789
2022-09-17

Functionalized nanofiller for polymers – preparation, properties and application
E. Wierzbicka    I. Legocka    E. Wardzińska-Jarmulska    B. Szczepaniak    M. Krzyżewski   
670-676
2021-01-24

Preparation and properties of polyurethane/functionalized multi-walled carbon nanotubes rigid foam nanocomposites
M. M. A. Nikje    A. Yaghoubi   
776-782
2014-12-30

Assessment of influence of extrusion method on selected properties of wood-polymer composites using Taguchi method of experiment planning
I. Michalska-Pożoga    S. Węgrzyk    T. Rydzkowski   
686-692
2021-01-15

Synthesis and properties of biodegradable polylactide and thermoplastic starch blends
B. Świerz-Motysia    R. Jeziórska    A. Szadkowska    M. Piotrowska   
271-280
2011-04-30

Effect of heat treatment on the tensile properties of incrementally processed modified polylactide

Bogdan Kozik    Mariusz Dębski    Piotr Bąk    Małgorzata Gontarz    Małgorzata Zaborniak   
357-361
2021-07-27

Wood filled high density polyethylene composites with nanosilica containing immobilized nanosilver
R. Jeziórska    M. Zielecka    A. Szadkowska    M. Wenda    L. Tokarz   
192-203
2012-03-30

UV-curable powder transparent coatings based on oligo(meth)acrylic resins
Katarzyna Pojnar    Barbara Pilch-Pitera    Maciej Kisiel    Aleksandra Zioło    Michał Kędzierski   
11-24
2024-02-13

Study on the effects of urethane-dimethacrylates' structures on the morphology and properties of polymers based on them
I. Barszczewska-Rybarek   
190-194
2022-08-24

Rheological properties of polypropylene composites with calcium carbonate under high shear rates
Arkadiusz Kloziński    Krzysztof Lewandowski    Jacek Mirowski    Mateusz Barczewski    Paulina Jakubowska   
403-412
2023-10-18

Epoxy-carbazole compositions. Part I. Compositions with 9-(2, 3-epoxypropyl) carbazole
P. Czub    W. Mazela    J. Pielichowski   
641-644
2022-09-17

The effect of photopolymerization conditions on selected mechanical properties of dental composites
Agnieszka Nowacka    Tomasz Klepka   
272-281
2021-01-12

Preparation of fibers from terpoly(ester-ether-ester)s by melt spinning or electrospinning from the solution
P. Zdebiak   
581-586
2022-08-23

The influence of synthetic polyhydroxybutyrate on selected properties of novel polyurethanes for applications in medicine. Part II. Polyurethanes containing cycloaliphatic diisocyanates in the hard segment
J. Brzeska    P. Dacko    H. Janeczek    M. Kowalczuk    H. Janik    M. Rutkowska   
27-34
2011-01-30

Estimation of mechanical (static and dynamic) properties of recycled polypropylene filled with wood flour
A. Liber-Kneć    S. Kuciel    W. Dziadur   
571-575
2022-08-30

Coagents for peroxide crosslinking of ethylene-propylene copolymer
A. Krzywania-Kaliszewska    M. Maciejewska    M. Zaborski   
734-739
2012-10-30

Effect of thermooxidative and photooxidative ageing processes on mechanical properties of magnetorheological elastomer composites
M. Masłowski    M. Zaborski   
264-271
2015-04-30

The properties of polyamide 6—isotactic polypropylene modified mixtures
J. Pigłowski    J. Bandurski    K. Jurkowski   
693-700
2022-09-21

Mechanical properties of poly(vinyl chloride) of defined gelation degree
S. Zajchowski   
890-893
2022-09-01

Properties of polymer composites with copper powders or flakes as fillers
P. Łoś    A. Łukomska    S. Kowalska    R. Jeziórska    J. Krupka   
338-346
2012-05-30

Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder
B. Maridass    B. R. Gupta   
456-460
2022-08-26

Study of the structure and rheological and mechanical properties of silicone rubber/montmorillonite nanocomposites
V. Rabova   
790-794
2022-08-18

Effect of high shear rate on the mechanical properties of polyethylene, poly(ethylene terephthalate), polystyrene and polypropylene waste blend

Mohd Adly Rahmat Saat    Rozaidi Rasid   
72-75
2022-02-24

Study of the effect of polymer network structure on thermal and mechanical properties of crosslinked (meth)acrylates - cis-hexahydrophthalic anhydride derivatives
M. Podgórski    J. Księżopolski   
33-40
2021-08-31

Poly(vinyl chloride) gelation in rolling process
K. Piszczek   
441-448
2022-09-01

Effect of sago starch and plasticizer content on the properties of thermoplastic films: mechanical testing and cyclic soaking-drying
M. J. Halimatul    S. M. Sapuan    M. Jawaid    M. R. Ishak    R. A. Ilyas   
422-431
2021-01-12

Effect of UV-VIS radiation on the thermomechanical properties and structure of dyed PLA film
M. Stepczyńska   
385-390
2015-06-30

Properties of polypropylene composites filled with microsilica waste
Artur Kościuszko    Piotr Czyżewski    Łukasz Wajer    Adrian Ościak    Marek Bieliński   
99-104
2020-12-15

Effects of electron radiation and styrene elastomer on some mechanical properties of polymer composites
M. Żenkiewicz    J. Polański    T. Karasiewicz    J. Czupryńska    W. Engelgard   
297-303
2022-08-23

Polymeric hybrid and composite materials containing functionalized polyhedral oligomeric silsesquioxanes (POSS)
E. Andrzejewska    A. Marcinkowska    D. Prządka    A. Kloziński    P. Jakubowska   
794-804
2013-10-30

Potato starch plasticization by natural deep eutectic solvent
Dorota Skowrońska    Katarzyna Wilpiszewska   
480-486
2023-10-25

Surface modification of methylvinylsilicone rubber vulcanizates with polyhedral oligomeric silsesquioxanes functionalized using chloride groups (POSS-Cl)
A. Strąkowska    A. Kosmalska    M. Zaborski   
272-278
2021-01-24

Halloysite nanotubes as polyolefin fillers
K. Szpilska    K. Czaja    S. Kudła   
359-371
2015-06-30

Polyester vascular prostheses — antibacterial and athrombogenic biomaterials. Part II. Effect of two-stage modification of polyester vascular prostheses on the selected physicochemical, mechanical and microbiological properties
A. Karaszewska    J. Bucheńska   
33-38
2013-01-30

Aging behavior of three-proof polyurethane coatings under UV radiation
Jianfa Wang    Zheng Gu    Jie Zhao    Susu Zhang    Peiyao Li    Chao Meng    Jinyong Sui    Xiaoyi Zhang    Shaokai Hu    Jiaying Pan    Junyi Li   
433-442
2022-09-29

Effect of ionic liquids on the selected properties of magnetic composites filled with micro-sized iron oxide (Fe3O4)
M. Masłowski    A. Strąkowska    M. Pingot    M. Zaborski   
117-124
2021-01-24

The effect of zinc oxide on the properties of ethylene—propylene rubbers
M. Zaborski    M. Owczarek    J. Leo   
678-683
2022-09-19

Some properties and applications of radiation modified polymeric materials
M. Żenkiewicz   
668-677
2022-09-17

Epoxy resin crosslinked with conventional and deep eutectic ionic liquids
H. Maka    T. Spychaj   
456-462
2012-06-30

Compatibilized ethylene-propylene-diene terpolymer nanocomposites containing different type of organoclays
A. Malas    C. K. Das   
204-211
2013-03-30

Structure, thermal characterization and mechanical properties of poly(pheny­lene oxide) and high impact polystyrene blend
R. Jeziórska    Z. Wielgosz    A. Szadkowska    M. Studziński    R. Komornicki    J. Stasiński    A. Kania-Szarek   
710-718
2021-01-24

Epoxy composites reinforced with natural fillers such as flax fiber and linseed cakes
Danuta Matykiewicz    Olga Mysiukiewicz   
828-832
2020-12-17

Mechanical properties and biodegradability of flax fiber-reinforced composite of polylactide and polycaprolactone
P. Rytlewski    M. Stepczyńska    K. Moraczewski    R. Malinowski    B. Jagodziński    M. Żenkiewicz   
603-610
2021-01-13

The influence of blowing agents type on foaming process and properties of rigid polyurethane foams
M. Kurańska    A. Prociak    S. Michałowski    A. Zawadzińska   
672-678
2021-01-13

Modifiers applied in polymer recycling: processing, properties and application
R. Jeziórska    B. Świerz-Motysia    A. Szadkowska   
748-756
2010-10-30

Polyols from recycled poly(ethylene terephthalate) flakes and rapeseed oil for polyurethane foams
A. Paberza    A. Fridrihsone-Girone    A. Abolins    U. Cabulis   
572-578
2015-09-30

The influence of cellular T8 oligosilsesquioxanes on mechanical properties of silicone rubber
A. Wojtas    M. Zaborski    A. Kosmalska   
208-214
2010-03-30

Flammability and other properties of elastomeric materials and nanomaterials. Part II. Nanocomposites of elastomers with attapulgite, nanosilica, nanofibres and carbon nanotubes
P. Rybiński    G. Janowska   
533-542
2013-08-30

Green thermoplastic poly(ether-urethane)s – synthesis, chemical structure and selected properties investigation
Paulina Kasprzyk    Kamila Błażek    Paulina Parcheta    Janusz Datta   
672—680
2020-12-16

Thermal properties of porous sodium polyacrylate/silica nanocomposites
Alina Korobeinyk    Gabriella Yurchenko    Alexander Matkovsky    Valentin Tertykh   
106-112
2023-02-28

Composites of recycled oxo-biodegradable foils filled with wood flour
J. Ryszkowska    K. Sałasińska   
740-747
2010-10-30

Natural cork. Part II. Properties and applications
M. Urbaniak    R. Gołuch-Góreczna    A. K. Błędzki    S. Gajdziński   
472-480
2021-01-15

Effect of oxazoline grafted polyethylene on the structure and properties of poly(butylene terephthalate)/polyamide 6 blends
R. Jeziórska   
350-355
2022-09-01

Characteristics of injection molded parts with the areas of weld lines
Elżbieta Bociąga    Władysław Skoneczny   
337-345
2020-12-15

Effect of halogen free modification of epoxy resins on their fire retardancy levels
E. Kicko-Walczak    P. Jankowski   
860-867
2022-09-01

Some aspects of studies on the preparation of solid thermosetting polyester molding compounds
W. Nowaczek    W. Królikowski    P. Penczek    J. Rosińska    Z. Bończa-Tomaszewski   
813-818
2022-09-01

A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers Part II
Paweł Wawrzyniak    Waldemar Karaszewski   
437-448
2020-12-16

Microcellular polymer and composites. Part II. Properties of different types of microcellular materials
A. K. Błędzki    O. Faruk    H. Kirschling    J. Kühn    A. Jaszkiewicz   
3-12
2022-08-26

Glass transition temperature-temperature-property (TgTP) diagram for EPY® epoxy system
M. Urbaniak   
537-543
2022-08-23

Proecological dispersions for surface modification of cellulosic materials. Part II. Modification of paperboard surfaces with Candelilla wax—biopolymer hybrid systems
A. Romanowska-Osuch    A. Bartkowiak   
49-57
2012-01-30

Relaxation processes and phase structure of ester-etheramide copolymers
A. Kozłowska    J. Majszczyk   
844-850
2022-09-01

Effect of radiation source distance on the properties of dental fillings
Jolanta Świderska    Waldemar Świderski    Adrian Antosik   
509-513
2021-01-12

Influence of the chemical structure of rapeseed oil-based polyols on selected properties of polyurethane foams
Katarzyna Uram    Aleksander Prociak    Maria Kurańska   
698-707
2020-12-16

Rheological and textural properties of hydrogels, containing sulfur as a model drug, made using different polymers types
Magdalena Wróblewska    Joanna Słyż    Katarzyna Winnicka   
208-215
2021-01-12

Flammability and other properties of elastomeric materials and nanomaterials. Part I. Nanocomposites of elastomers with montmorillonite or halloysite
P. Rybiński    G. Janowska   
327-341
2013-05-30

Oligourethane glycols obtained in glycolysis of polyurethane foam as semi-finished products for cast urethane elastomers preparation
J. Datta    S. Pasternak   
352-357
2022-09-01

Effects of blowing agent content and injection moulding conditions on selected properties and surface quality of polypropylene moulded parts
E. Bociąga    P. Palutkiewicz   
38-48
2012-01-30

Innovative oligomeric poly(vinyl chloride) plasticizers for specialized applications
Marek Lewandowski    Kazimierz Piszczek    Marta Pieńkowska    Krzysztof Lewandowski   
550-556
2020-12-16

Modification of polymers with the application of ion beam bombardment. Part I. History, recent developments, and perspectives for development
D. Pieczyńska    U. Ostaszewska    D. M. Bieliński    J. Jagielski   
439-451
2011-06-30

Percolation behavior and mehanical properties of polycarbonate composites filled with carbon black/carbon nanotube systems
P. Pötschke    M. H. Arnaldo    H.-J. Radusch   
204-211
2012-03-30

The influence of ceramic admixture on physical and chemical properties of surgical cement
A. Balin    J. Myalski    G. Pucka    J. Toborek   
852-858
2022-08-30

Effect of poly(butylene terephthalate) functionalized with 2,2'-(1,3-phenylene)-bis(2-oxazoline) on the structure and properties of polyamide 6 blends with textile waste containing poly(ethylene terephthalate)
R. Jeziórska   
201-207
2022-08-24

Properties of recycled polymer mixtures obtained in the screw-disc extrusion process
T. Rydzkowski   
135-139
2011-02-28

Biocomposites based on thermoplastic starch or polylactide/starch blends as the matrices filled with natural fibers
S. Kuciel    A. Liber-Kneć    S. Zajchowski   
747-753
2022-08-18

Synthesis and properties of vinylpyrrolidone/ (trimethoxysilyl)propyl methacrylate gels containing different amounts of crosslinking agent
A. H. Mohammed    M. B. Ahmad    N. A. Ibrahim    N. Zainuddin   
577-585
2021-01-13

Selected geometrical features and strength indicators of elements manufactured by fused deposition modeling technology
K. Pepliński    P. Czyżewski    D. Górecki    D. Sykutera    M. Bieliński   
198-207
2021-01-15

Characteristics of photocurable acrylic resins for use in wood industry
Magdalena Jurczyk-Kowalska    Magdalena Płocińska    Emilia Choińska    Andrzej Zagórski   
340-347
2021-01-12

Effects of nanofillers and sample dimensions on the mechanical properties of injection-molded polylactide nanocomposites
M. Żenkiewicz    J. Richert   
591-594
2022-08-23

Modification of polyamide 6 with halloysite nanotubes
K. Kelar    J. Olejniczak    K. Mencel   
18-23
2013-01-30

Comparison of thermal, structural and morphological properties of poly(l-lactide) and poly(l-lactide)/ hydroxyapatite microspheres for laser sintering processes
Anna Krokos    Agnieszka Bondyra    Ryszard Kwiatkowski    Piotr Gruber    Michał Olejarczyk    Bogusz Stępak    Paulina Dzienny    Bartłomiej Kryszak    Małgorzata Gazińska    Arkadiusz Antończak   
605-612
2020-12-16

The effect of the mold cavity feeding mode on the structure and crystallinity of HD-PE
E. Bociąga   
638-641
2022-09-19

Tin oxide cross-linking of chloroprene rubber
A. Smejda-Krzewicka    W. M. Rzymski    D. Kowalski   
186-191
2015-03-30

The effect of extrusion conditions for a screw-disk plasticizing system on the mechanical properties of wood-polymer composites (WPC)
I. Michalska-Pożoga    T. Rydzkowski   
202-210
2021-01-24

Resistance of high solid polyurethane coatings to biotic and abiotic factors
J. Wojturska   
708-715
2021-01-13

Wpływ oddziaływania strefy tarczowej wytłaczarki ślimakowo-tarczowej na strukturę i właściwości wytłoczyny z polietylenu małej gęstości (PE-LD)
I. Michalska-Pożoga    J. Diakun   
845-850
2014-12-30

Properties of composites based on polyamide 10.10 reinforced with carbon fiber
S. Kuciel    P. Kuźnia    P. Jakubowska   
106-112
2021-01-24

Effects of stress and biological environment on polymeric implants' durability
J. Chłopek   
182-189
2022-09-01

Hybrid polymer composites for rapid prototyping of gears
M. Oleksy    G. Budzik    M. Heneczkowski   
403-407
2010-05-30

Antistatic polyethylene free-standing films modified with expanded graphite – technological aspects
Paweł Imiołek    Krzysztof Kasprowicz    Jadwiga Laska   
275-279
2020-12-15

Mechanical properties of silicone vulcanizates crosslinked with polymethylhydrosiloxanes, containing silica and calcium carbonate
M. Fejdyś    J. Chruściel    A. Miazga   
48-57
2022-08-30

Pigmented elastomeric composites with limited flammability
A. Pająk    P. Rybiński    R. Dobrzyńska    G. Janowska    S. Żaczek   
396-401
2015-06-30

The effect of funcionalized ethylene-n-octene copolymer on mechanical properties of bioPET with organic waste fillers
Karina Rusin-Żurek    Stanisław Kuciel    Maria Kurańska   
330-336
2023-09-06

Influence of soft segments on thermal and mechanical properties of terpoly(ester-ether-ester)s
P. Zdebiak    P. El Fray   
764-768
2022-08-24

The mechanical properties and conduction of solid polyurethane electrolytes depending on the methods of synthesis and LiClO4 content as addition
K. Leszkowski    M. Strankowski    A. Miszczyk    J. T. Haponiuk   
578-584
2011-08-30

Efficiency of thermomechanical reclaiming of ground tire rubber conducted in counter-rotating and co-rotating twin screw extruder
K. Formela    M Cysewska   
231-238
2014-03-30

Polyurethane composites with enhanced thermal conductivity containing boron nitrides
Mariola Sadej    Lukasz Gierz    Magdalena Naumowicz   
591-594
2021-01-12

Mechanical and thermal properties of hybrid nanocomposites prepared by in situ polymerization
S. Paszkiewicz    I. Pawelec    A. Szymczyk    Z. Rosłaniec   
172-180
2021-01-24

Functional graded self-reinforced polypropylene sheets
A. K. Bledzki    A. Ries    D. Passmann   
369-374
2011-05-30

Dimensional stability, physical, mechanical and thermal properties of high density polyethylene with peanut hulls composites
K. Sałasińska    J. Ryszkowska   
461-466
2013-06-30

Modification of hydrolytic stability of high molecular weight poly(e-caprolactone) by addition of medium molecular weight poly(e-caprolactone) agregated in the presence of CaO
M. Bednarek    M. Cichorek   
598-601
2014-08-30

Application of ATOS II optical system in the techniques of rapid prototyping of epoxy resin-based gear models
T. Dziubek    M. Oleksy   
44-51
2021-01-15

Syntheses, chemical strustures and properties of poly(ester-etherurethane)s crosslinked with styrene, synthesized from unsaturated oligo(alkylene ester-ether)diols and 4,4'-diphenylmethane diisocyanate
J. Kucińska-Lipka    H. Janik    A. Balas   
781-785
2022-08-18

Influence of cellulose on mechanical and thermomechanical properties of elastomers obtained from mixtures containing natural rubber
J. Datta    E. Głowińska   
823-827
2011-12-30

Morphology, mechanical and thermal properties of flexible polyurethane foams modified
Ł. Piszczyk    A. Hejna    K. Formela    M. Danowska    M. Strankowski   
783-791
2014-12-30

Producing mobile robot gripper part prototypes from polymeric materials using additive manufacturing technology. Part I. Mechanical properties and material constants of specimens from acrylonitrile-butadiene-styrene copolymer
M. Cader    R. Oliwa    O. Markowska    G. Budzik   
27-35
2021-01-15

The surface layer and friction of elastomers
D. Bieliński   
684-691
2022-09-19

Modified polyurethanes for biomedical applications
I. Reksiak    G. Rokicki   
592-602
2022-09-21

Study of welding of poly(ether-ester) elastomers. Part I. Influence of contents of flexible segments on morphology and mechanical properties
K. Kwiatkowski    Z. Rosłaniec   
268-274
2022-09-01

Influence of thermally exfoliated graphite on physicochemical, thermal and mechanical properties of copolyester nanocomposites
Z. Staniszewski    M. El Fray   
482-489
2021-01-24

Thermal stability and mechanical properties of hybrid materials based on nitrocellulose grafted by aminopropylisobutyl polyhedral oligomeric silsesquioxane
X. Yang    Y. Wang    Y. Li    Z. Li    T. Song    X. Liu    J. Hao   
576-587
2021-01-15

The effect of natural fillers on the mechanical properties and flammability of low-density polyethylene

Bronisław Samujło   
396-402
2023-10-19

Preparation and characterization of epoxy resins filled with submicron spherical zirconia particles
F. Bondioli    V. Cannillo    E. Fabbri    M. Messori   
794-798
2022-08-30

Effect of porophor content on the useful properties of external coatings of cables obtained by foaming extrusion
T. Garbacz    A. Tor   
286-293
2022-08-26

Compatibilization, processing and properties of post-consumer PET/polyolefin blends
A. Pawlak    J. Morawiec    A. Gałęski   
491-499
2022-09-18

Polyurethane elastomers filled with granulated rubber
M. Czupryński   
110-113
2022-09-01

Modeling of characteristics at compression and functinal properties of hyperelastic polyurethane materials applied in mechanical engineering
A. Boczkowska    K. Babski    J. Osiński    P. Żach   
544-550
2022-08-23

Polyurethanes modified by hydroxyapatite as biomaterials
P. Król    B. Król    K. Pielichowska    P. Szałański    D. Kobylarz   
559-571
2015-09-30

Studies on the properties of epoxy-oxothiolane resins
P. Czub    G. Kowalski    J. Pielichowski   
642-644
2022-09-21

Application of coordination measuring methods for assessing the performance properties of polymer gears
T. Dziubek   
49-52
2021-01-13

Heat plasticization of starch by extrusion in the presence of plasticizers
K. Wilpiszewska    T. Spychaj   
327-332
2022-08-30

The influence of screw configuration and screw speed of co-rotating twin screw extruder on the properties of products obtained by thermomechanical reclaiming of ground tire rubber
K. Formela    M Cysewska    J. Haponiuk   
170-177
2014-02-28

Properties of the solutions and coatings of microgels containing polysiloxaneurethane prepolymers
Z. Członkowska-Kohutnicka    M. Zielonka    D. Wilson-Polit    R. Kwiatkowski    J. Sobczak    I. Leszczyńska    J. Kozakiewicz    A. Winiarska   
800-808
2022-09-17

Bioresorbable polymeric materials – current state of knowledge

Kamila Wiśniewska    Zbigniew Rybak    Marcin Wątrobiński    Marcin H. Struszczyk    Jarosław Filipiak    Maria Szymonowicz   
3-10
2021-01-20

Synthesis of propylene/ethylene copolymers and their characteristics
Z. Majchrzak   
808-812
2022-09-18

Composites of photocured acrylic resins with natural and polymeric fibers
E. Andrzejewska    M. Andrzejewski    J. Jęczalik    T. Sterzyński   
382-385
2022-08-18

Composites based on polypropylene recyclates and natural fibers
S. Kuciel    A. Liber-Kneć    S. Zajchowski   
718-725
2010-10-30

Novel halogen-free flame retardants - flame retardation of unsaturated polyester resins with use of boron compound
E. Kicko-Walczak   
126-132
2022-08-23

Polycarbonate urethane nanocomposites with nanosilica for implants of the intervertebral disc
B. Waśniewski    M. Auguścik    P. Parzuchowski    M. Zielecka    J. Ryszkowska   
812-818
2012-12-30

Biodegradable polymers in the general waste stream – the issue of recycling with polyethylene packaging materials
S. Kuciel    P. Kuźniar    M. Nykiel   
31-37
2021-01-13

Kompozyty żywicy epoksydowej zmodyfikowanymi bentonitami dla potrzeb przemysłu lotniczego
M. Oleksy    R. Oliwa    M. Heneczkowski    B. Mossety-Leszczak    H. Galina    G. Budzik   
228-235
2012-03-30

Compatibilization of polyolefins waste based blends by reactive modifiers with anhydride or oxazoline functional groups
R. Jeziórska    A. Szadkowska    M. Studziński   
371-374
2022-08-26

Polymeric and composite bone cements and related materials. Part I. Classical methacrylic cements and their modifications
J. Łukaszczyk   
79-88
2022-09-01

Modification of styrene-isoprene-styrene triblock copolymer with a core-shell filler
L. Jakuczek    J. S. Gutmann    Ch. Herrmann    D. Żuchowska   
888-892
2022-08-23

Thermal and physico-mechanical properties of biodegradable materials based on polyhydroxyalkanoates
Igor Semeniuk     Viktoria Kochubei    Elena Karpenko    Yuriy Melnyk    Volodymyr Skorokhoda    Natalia Semenyuk   
561-566
2023-01-02

Influence of shear stress on the structures and properties of polyamide 6/montmorillonite nanocomposites
K. Mencel    K. Kelar    B. Jurkowski   
361-369
2022-08-18

Polyurethane elastomers based on carbonic and tartaric acid derivatives as renewable resources
G. Rokicki    M. Mazurek    K. Tomczyk   
541-550
2015-09-30

Varnishes modified with nanoparticles for use in electrical insulation
B. Górnicka    B. Czołowska    B. Mazurek    J. Zawadzka    L. Górecki   
367-370
2022-08-26

POSS compounds as modifiers and additives for elastomeric composites
M. Zaborski    A. Strąkowska    A. Kosmalska    H. Maciejewski    M. Dutkiewicz   
772-782
2013-10-30

Rigid polyurethane foams with improved flame resistance
J. Czech-Polak    R. Oliwa    M. Oleksy    G. Budzik   
115-124
2021-01-13

Innovative method to prepare polyester polyols intended for the production of footwear soles
Paulina Biniecka    Marta Pieńkowska    Anna Opalska   
199-207
2021-01-12

Structure, thermal stability and mechanical properties of polyurethanes based on glycolysate from polyurethane foam waste, prepared with use of 1,6-hexanediol as a glycol
J. Datta    M. Rohn   
871-875
2022-08-23

Thermal aging resistance of natural rubber compounded with conjugated Schiff base
Jianfa Wang    Zheng Gu    Susu Zhang    Ning Wang    Jinyong Sui    Xiaoyi Zhang    Peiyao Li    Wenjin Liu    Yifan Hu   
20-27
2022-01-25

The effect of the heat treatment on the crosslinking of epoxy resin for aviation applications
Mateusz Mucha    Tomasz Sterzyński    Aneta Krzyżak   
776-783
2020-12-17

Studies of the viscoelastic properties of selected polymer systems by the dynamic mechanical analysis
M. Kurcok    P. Szewczyk   
637-642
2022-09-18

1 - 261 of 261 items
Łukasiewicz Research Network – Industrial Chemistry Institute
ul. Rydygiera 8,
01-793 Warszawa
email: polimeryjournal@ichp.lukasiewicz.gov.pl
tel. +48 22 633 98 04
Links:
https://ichp.lukasiewicz.gov.pl
https://lukasiewicz.gov.pl
About:
Copyright 2019 by Łukasiewicz Research Network – Industrial Chemistry Institute
OJS Support and Customization by LIBCOM
Platform & workfow by OJS/PKP